Showing posts with label GLT Valve. Show all posts
    Showing posts with label GLT Valve. Show all posts


  • Check Valve Application
    Swing check valves are design to close quickly and automaticaly with positive shut off in either horizontal or vertical (flow up) pipe runs. Inherently, swing check valves have a low pressure drop and are best suitable for velocity applications. GLT closure design allows GLT swing check valve to close completely even and remain closed with no flow when installed in a horizontal pipe run.
    Manufacturing Standard
        
    Body and Cover Connection
    Standard body-bonnet joint of check valves are connected by studs and nuts and are machined as follows:
    Standard Parts & Material
    Note : Other valve material composition are available on special request

    FORGED STEEL CHECK VALVE
    Manufacture : GLT
    Specification
    Design to API 602
    Forged Steel Piston and Swing Check Valve
    Bolted cover
    Regular and Full Port

    Threaded and Socket Weld Ends
    Manufacturing Standards
    Standards Parts & Material
    Note : Other valve material composition are available
    Class 800
    Dimensions
    Working Pressure : Carbon Steel - 1975 p.s.i @ 100°F / 38°C
    Class 1500
    Dimensions
    Working Pressure : Carbon Steel - 3705 p.s.i @ 100°F / 38°C
    Class 150/ 300/ 600
    Specifications
    Design to API 602
    Forged Steel Piston and Swing Check Valve
    Bolted cover

    Regular and Full Port
    Flanged Ends
    Manufacturing Standard
    Standard Parts & Material
    Note : Other valve material composition are available
    Dimensions
    Working Pressure : Carbon Steel
                                    Class 150 - 285 p.s.i @ 100°F / 38°C
                                   Class 300 - 740 p.s.i @ 100°F / 38°C
                                   Class 150 - 1480 p.s.i @ 100°F / 38°C

  • Valve Specifications

    Gate Valve Application
    Gate valve are primary used for stop valves fully opened or fully closed. They are not normaly considered for throttling purpose, but more for slurries, viscous fluids, etc. Gate valves are characterized by a traveling wedge, which is moved with the operation of the stem nut. the wedge travels perpendicular to the direction of the flow.
    Gate valves usually have a minimum pressure drop when fully open, provide tight shut-of when fully closed and remain relatively free of contamination buildup.
     
    Manufacturing Standards
     
    Body and Bonnet Conection
    Standard body-bonnet joint of gate valve are connected by studs and nuts are machined as follows:
     
                          
    Standards Parts & Material
               

     
    CAST STEEL GATE VALVE
    Manufacture : GLT
     
    Specifications
    Design to API 600
    Bolted Bonnet
    Outside Screw & Yoke
    Rising Steem
    Non-Rising Handwheel
    Flexible Wedge
     
    Class 150
     
    Standard Parts & Material
                             
                                                                                                                                 Note : Other valve material composition are available
     
    Dimensions
     Working Pressure : Carbon Steel - 285 p.s.i @ 100°F / 38°C
     
    Class 300
     
    Standard Parts & Material
                             
                                                                                                                                   Note : Other valve material composition are available
     
    Dimensions
     Working Pressure : Carbon Steel - 740 p.s.i @ 100°F / 38°C
     
    Class 600
     
    Standard Parts & Material
              
                                                                                                                                    Note : Other valve material composition are available
     
    Dimensions
    Working Pressure : Carbon Steel - 1480 p.s.i @ 100°F / 38°C
     
    Class 900
     
    Standards Parts & material
                                       
                                                                                                          Note : Other valve material composition are available
     
    Dimensions
    Working Pressure : Carbon Steel - 2220 p.s.i @ 100°F / 38°C


  • Check Valve Application
    Swing check valves are design to close quickly and automaticaly with positive shut off in either horizontal or vertical (flow up) pipe runs. Inherently, swing check valves have a low pressure drop and are best suitable for velocity applications. GLT closure design allows GLT swing check valve to close completely even and remain closed with no flow when installed in a horizontal pipe run.
     
    Manufacturing Standard
        
     
    Body and Cover Connection
    Standard body-bonnet joint of check valves are connected by studs and nuts and are machined as follows:
     
    Standard Parts & Material
    Note : Other valve material composition are available on special request

    CAST STEEL SWING CHECK VALVE
    Manufacture : GLT
     
    Specifications
    Design to API 600
    Bolted Cover
    Horizontal or Vertical Lines
     
    Class 150
     
    Standard Parts & Material
    Note : Other valve material composition are available on special request
     
    Dimensions
    glt_caststeel_checkvalve_dimension
    Working Pressure : Carbon Steel - 285 p.s.i @ 100°F / 38°C
     
    Class 300
     
    Standard Parts & Material
    Note : Other valve material composition are available on special request
     
    Dimensions
    Working Pressure : Carbon Steel - 740 p.s.i @ 100°F / 38°C
     
    Class 600
     
    Standard Parts & Material
    Note : Other valve material composition are available on special request
     
    Dimensions
    Working Pressure : Carbon Steel - 1480 p.s.i @ 100°F / 38°C
     
    Class 900
     
    Standard Parts & Material
    Note : Other valve material composition are available on special request
     
    Dimensions
    Working Pressure : Carbon Steel - 2220 p.s.i @ 100°F / 38°C

Subscribe to: Posts (Atom)