Check Valve Application
Swing check valves are design to close quickly and automaticaly with positive shut off in either horizontal or vertical (flow up) pipe runs. Inherently, swing check valves have a low pressure drop and are best suitable for velocity applications. GLT closure design allows GLT swing check valve to close completely even and remain closed with no flow when installed in a horizontal pipe run.
Manufacturing Standard
Body and Cover Connection
Standard body-bonnet joint of check valves are connected by studs and nuts and are machined as follows:
Standard Parts & Material
Note : Other valve material composition are available on special request
CAST STEEL SWING CHECK VALVE
Manufacture : GLT
Specifications
Design to API 600
Bolted Cover
Horizontal or Vertical Lines
Class 150
Standard Parts & Material
Note : Other valve material composition are available on special request
Dimensions
Working Pressure : Carbon Steel - 285 p.s.i @ 100°F / 38°C
Class 300
Standard Parts & Material
Note : Other valve material composition are available on special request
Dimensions
Working Pressure : Carbon Steel - 740 p.s.i @ 100°F / 38°C
Class 600
Standard Parts & Material
Note : Other valve material composition are available on special request
Dimensions
Working Pressure : Carbon Steel - 1480 p.s.i @ 100°F / 38°C
Class 900
Standard Parts & Material
Note : Other valve material composition are available on special request
Dimensions
Working Pressure : Carbon Steel - 2220 p.s.i @ 100°F / 38°C